 |
|
 |
 
DIN RAIL
Enclosures
DS250VG 
|
CITEL model DS250VG is a heavy duty Type 1 AC Surge Protection Device (SPD) for high risk, low tolerance electrical service entrance applications. The DS250VG provides protection against the direct and indirect effects of lightning and is particularly useful in a high lightning area where the risk of heavy surge current or even direct strike is high, i.e. buildings equipped with lightning rods.
Data Sheet |
DS150E
|
CITEL model DS150E is a heavy duty Type 1 AC Surge Protection Device (SPD) for high exposure applications such as direct lightning strikes, capacitor bank switching and large inductive loads. The DS150E is a single pole device that incorporated a multi-varistor circuit.It offers unmatched mechanical flexibility and can be installed in various worldwide system configurations with voltages up to 480V AC.
Data Sheet |
DS100EG 
|
CITEL model DS100EG is a heavy duty Type 1 AC Surge Protection Device (SPD) for the Neutral (N) to Ground (PE) line mode. It is associated with either the CITEL model DS150E or DS250VG protection modules. The DS100EG provides common plus differential mode protection for a 1, 2 or 3 phase AC power network with a neutral and is in accordance with IEC60364-5-534 standard, «CT2» configuration.
Data Sheet |
DS240 
|
Citel’s DS240 surge protectors are used mainly for distribution panels of single-phase and three-phase networks. They provide common-mode protection (between the active conductors and ground) and are available with an option remote alarm.
The DS240 is built with a plug-in module and a fixed base, which allows for easy access to protection modules.
Data Sheet |
DS40 
|
CITEL model DS40 is a standard duty Type 2 and 3 AC Surge Protector (SPD) used in distribution or control panel applications. The DS40 is a single pole module that can be combined with other DS40 modules or a DS40G (N-G Mode Only) module. It is configurable for all 1, 2, and 3 phase application up to 480V AC.
Data Sheet |
DS40G 
|
CITEL model DS40G is a standard duty Type 2 AC Surge Protector (SPD) used in distribution or control panel applications. The module is used only in the Neutral (N) to Ground (PE) mode and must be used in combination with 1 or more model DS40 Series.
Data Sheet
|
Enclosures
|
|
|
 |
 |
|
