 |
|
 |
 
Equipment Level
Equpiment Level (cont.)
DS250VG
|
Citel’s DS250VGis designed to protect against direct and indirect effects of lightning. The device is extremely rugged for application in high lightning density areas where the risk of heavy surge current or even direct strikes is a serious concern. It can be configured for both single and three phase networks.
Data Sheet
|
DS150E
|
Citel’s DS150E line of AC surge protection modules are designed for high exposure applications such as lightning strikes, capacitor bank switching, and large inductive loads. With its single pole design, it offers the user unmatched flexibility when installing into different system packages and voltage configurations. Many OEM’s utilize the rugged DS150E modules as their protection component of choice for mission critical equipment.
Data Sheet |
DS100EG
|
The DS100EG spark gap is designed to be used with the DSx50E or DSx50VG surge protection modules to provide common and differential surge protection for AC power networks described in ANSI/IEEE C62.41, IEC-61643-11, and VDE 0675-6/A2. The device is UL1449 2nd listed and is connected between neutral (N) and ground (G/PE) wires.
Data Sheet |
DS240
|
Citel’s DS240 surge protectors are used mainly for distribution panels of single-phase and three-phase networks. They provide common-mode protection (between the active conductors and ground) and are available with an option remote alarm.
The DS240 is built with a plug-in module and a fixed base, which allows for easy access to protection modules.
Data Sheet
|
DS40
|
Citel’s DS40 surge protectors are used mainly for distribution panels of single-phase and three-phase networks. They provide common-mode protection (between the active conductors and ground) and are available with an option remote alarm.
The DS40 is built with a plug-in module and a fixed base, which allows for easy access to protection modules.
Data Sheet
|
DS40G 
|
CITEL model DS40G is a standard duty Type 2 AC Surge Protector (SPD) used in distribution or control panel applications. The module is used only in the Neutral (N) to Ground (PE) mode and must be used in combination with 1 or more model DS40 Series.
Data Sheet
|
Equpiment Level (cont.)
|
|
|
 |
 |
|
